AJA RD10MD2, Инструкция по установке и эксплуатации

Страница: 8 / 16

8
Installation
Typically, RD10MD2 installation consists of the following:
1. disconnect power from the frame (remove line cord)
2. remove the FR1/FR2 front panel
3. install RD10MD2 card module
4. replace the FR1/FR2 front panel
5. apply power to the frame by connecting a north american-style power cord
from the frame to mains power (90 to 260 VAC)
!
Warning!
Ensure Mains Power is disconnected before installing the FR1 or FR2 frame R-
series modules into the frame, or installing and removing options. If a Mains
switch is not provided, the power cord(s) of this equipment provide the means of
disconnection. The socket outlet must be installed near the equipment and must
be easily accessible.
Warning!
FR2 Dual Power Cord Notice—please read this. To reduce the risk of electrical
shock, disconnect both power cords before servicing equipment.
Caution!
The FR1/FR2 front fan door is heavy and is not hinged. Remove with Caution.
Instructions for removing the frame front door for module installation is discussed in
the
FR1/FR2 User Manual.
Specifications
Item Specification
Formats: HD: 1080i 50/59.94/60 Hz
1080p/psf 23.98/24/25/29.97/30 Hz
720p 23.98/24/25/29.97/30/50/60 Hz
Inputs: 2 Channels, HD-SDI or SDI SMPTE 259/292/296, 10-bit, 2x BNC
Outputs: Each Channel has two outputs configurable for either SDI (SMPTE
259M, 10-bit) or analog composite NTSC/PAL, 2x BNC
Channel 1 has one reclocked loop-through output, 1 BNC
Channel 2 has one reclocked loop-through output, 1 BNC
Downconversion: Multi-point interpolation, 10-bit processing
3:2 conversion for 23.98/24p/psf inputs
Size: Fits AJA R-Series Frames
Power Consumption: 7 watts