AJA kumo 1604 Скачать руководство пользователя страница 39

Страница: 39 / 73

KUMO SDI Routers and Control Panels v4.7r1 39 www.aja.com

Figure 32. KUMO CP2 Configuration with Disabled Buttons

4. Web UI buttons that have been disabled will go blank, and the tally lights of

the disabled physical buttons on the KUMO CP will go off.

NETWORK Screen

The NETWORK Screen provides access to standard TCP/IP setup fields for

network configuration. See

"Quick Start Configuration" on page 12

and

"Network

Configuration In Depth" on page 15

for more information.

IMPORTANT: Do not Update Network Settings with 0.0.0.0 values for either IP Address or

Netmask. This will disable the control panel and it will need to be returned to AJA

for repair.

Figure 33. KUMO CP Network Setup Screen

• NETWORK and FIRMWARE tabs – same as KUMO router Network and Firmware

settings, see

"Network Setup" on page 28

"UPnP Host" on page 30

, and

"Firmware Updating" on page 30

User Authentication

This parameter enables or disables an authentication login requirement. See

"User

Authentication" on page 29

for more information.

FIRMWARE Screen

The FIRMWARE Screen is used to update the KUMO's firmware. See

"Firmware

Updating" on page 30

for more information.

ALARMS Screen

The Alarms screen reports KUMO error conditions, and allows suppressing

selected error messages. See

"KUMO Alarms" on page 32

for more information.

Содержание kumo 1604










































































Результаты поиска

Содержание kumo 1604

Отзывы:

AJA kumo 1604, Инструкция по установке и эксплуатации, Страница: 39 / 73

Результаты поиска

Содержание kumo 1604

Отзывы: