KUMO SDI Routers and Control Panels v4.7r1 28 www.aja.com
Load Selected Salvo
Click to clear any current configuration from the router table and load the
crosspoint paths from the currently selected salvo into the table.
Clear Selections
Click to clear all the paths from the router table.
Save Routes To Salvo
After configuration, click on this button to save the selected salvo.
NOTE: If you leave the page without saving, all the changes made to the selected salvo
will be lost.
Salvo Configuration Procedure
1. Go to the KUMO router HOME Screen and select the router you wish to
control with the drop down menu.
2. Go to the Salvos screen and select the salvo to be configured.
3. If you want to edit the name of the salvo, click on its name in the field on the
right, type in a new unique name, and press the Enter key to save the name.
Clicking outside the field will undo any typed changes.
4. Select the crosspoint(s) in the Salvo Editor below for the routes to include in
this salvo. Sources are listed vertically, and Destinations horizontally.
• Clicking on the empty box below the left Source column header creates a
one to one (diagonal) salvo in the router table.
• Clicking on any Source number applies that same Source to all the
Destinations.
5. Click the
Save Routes To Salvo
button to save the current router table to
that salvo.
Network Setup
The NETWORK Screen provides access to standard TCP/IP setup fields and allows
you to click on the "System Name" field to change it. The MAC address is a fixed
machine address composed of manufacturer identification and product serial
numbers.
You can choose DHCP or Static IP with the drop down menu. When Static IP is
selected the fields below are able to be edited. After changing the network type
or entering Static IP information, click the
Update Network Settings
button to
commit your settings.