AJA KONA IP Скачать руководство пользователя

Страница: 50 / 76

KONA IP Transport, Capture, Display v16.0r1 50 www.aja.com

Windows Preset Files Storage Location

• c:\Users\<username>\AppData\Local\AJA\Control Panel\<device name>

Presets\

Reset to Default

When you click the "Reset Device" button the Default User Preference file will be

deleted and AJA Control Panel will do one of the following:

• If a Default Global Preference if found, it is loaded and the device is set to this

state.

• If a Default Global Preference file is not found, “factory defaults” are loaded

and the device is set to this state.

NOTE: See

"Default Preferences" on page 21

for more information.

Erase all Prefs

For technical support purposes you may be required to remove the current

Preference settings. Clicking on the "Erase all Prefs" button deletes the current

Default User Preference file without accessing a Default Global Preference file, if

one exists. Current AJA device settings are not altered, but changing any setting

will immediately regenerate a Default Use Preference file with the changed

settings.

NOTE: Clicking on the AJA Control Panel Erase All Prefs button does NOT delete an

existing Global Preference file from that shared location.

Firmware Screen

Three versions of firmware are available for KONA IP. You can select from:

• KonaIP s2022 - For use only with 2022-6 full bandwidth video.
• KonaIP J2K - With purchase and installation of an optional license, adds JPEG

2000 compressed video capabilities.

• KonaIP s2110 - Permits granular transport of individual or groups of video and

audio streams.

Содержание KONA IP













































































Результаты поиска

Содержание KONA IP

Отзывы:

Похожие инструкции для KONA IP

Бренды по названию

Популярные бренды

AJA KONA IP, Инструкция по установке и эксплуатации

Результаты поиска

Содержание KONA IP

Отзывы:

Похожие инструкции для KONA IP

Бренды по названию

Популярные бренды