AJA IOExpress, Инструкция по установке и эксплуатации, Страница: 46 / 68

40
Timecode Screen
The timecode is used for both monitoring the RP-188 timecode embedded in the digital data
stream and for selecting a timecode offset (if required) for the attached VTR (connected to the
RS-422 port)—and sent during assemble-edit mode.
Note: SMPTE 12M-2 is the updated name and specification for what was RP-188.
Timecode Screen
Timecode Screen Settings
RP-188 Timecode <n> —in RP-188 timecode (SMPTE 12M-2) there can be multiple timecode
values in the data stream. Use this pull-down to select the one you wish to monitor. The
selection will be displayed in the timecode value displayed to the right of the pull-down.
User Bits —For monitoring variable framerate (VFR) timecode (such as Varicam), you may
wish to monitor the user bits embedded in the timecode. If you set this checkbox, Io
Express will detect and interpret the user bits and display them next to the checkbox.
USO
RESTRITO