Io IP Transport, Capture, Display v16.2r1 43 www.aja.com
IP Input Screen
The IP Input Screen on Io IP, lets you define parameters for receiving inputs to the
Io IP from another device on the network. This screen has two tabs, one for each
Channel.
NOTE: The IP 1 Input and IP 2 Input labels do not represent the physical SFP cages on the
Io IP. They represent different transmissions being received by the Io IP, possibly
over the same 10GbE link.
Channel 1 or 2
Select the input channel to be configured.
Multicast
When selected, Multicast operation is used. Enter a valid multicast IP address into
the Dest IP Address field.
Unicast
When selected, Unicast operation is used. The Dest IP Address field is
automatically filled with that device's Local IP Address (from the IP Network
screen) and the field will be grayed out (not editable).
NOTE: Turning off Unicast operation makes the Dest IP Address editable, but it retains
the previously applied Unicast IP address. You must edit the Dest IP Address field
on this screen to resume Multicast operation.
Destination IP Addr
This filter lets you specify the network address where a multicast from another
device on the network can be found.
Destination Port
This filter lets you specify the port number being used to send a multicast to the
‘Destination IP’ address specified above.
