Hi5-4K Mini-Converter v2.7r3 19 www.aja.com
Update Tab Screen
Use this Update screen to view the software version currently installed on the
converter or install new software.
NOTE: When discussing Mini-Converters, “Firmware” is software that will be stored in
the Mini-Converter’s non-volatile memory and used when it is powered up. This is
something different than the AJA Mini-Config application software. The version
numbers shown in the Update screen refer only to the firmware.
Installed -
This field shows the version of the firmware currently installed inside
the Mini-Converter.
Desired -
This field shows the version of firmware embedded in the AJA Mini-
Config application which you can install into the Mini-Converter by clicking
the Update button.
Update
This button initiates a software update operation loading the “Desired” version of
firmware into the Mini-Converter’s non-volatile memory.
Progress -
This indicator bar shows the progress of firmware installation.
Software Update Procedure
1. Check the AJA website for new AJA Mini-Config software for your Mini-
Converter. If new software is found, download it and uncompress the file
archive (zip). Here is the URL to use when checking:
https://www.aja.com/products/mini-config-software
2. Connect the Mini-Converter to a Mac or PC via a USB port on the computer
and run the new AJA Mini-Config software just downloaded.
3. Click on the Update tab screen.
4. Check the Installed version level against the Desired version level. If the
Desired is newer, then click the Update button to download the new
