Hi5-3D Mini-Converter v3.3 6
www.aja.com
I/O Connections
Figure 2. Hi5-3D Converter
+5-20 VDC
Power
Input
SDI Output
2-Channel
Unbalanced
Analog Audio
Outputs (RCA
Jacks)
HDMI Output
SDI Input 1 Left
SDI Input 2 Right
USB Port
LOCK LED
NOTE: The LOCK LED indicates valid input video by color. Off is no signal, green is SD
video, red is HD video.
Installation
Typically, Hi5-3D installation consists of the following steps:
1. Ensure the Hi5-3D is disconnected from power.
2. Connect video equipment to the converter BNCs and HDMI connector.
3. Connect audio equipment to RCA connectors (optional).
4. Apply power to the converter (AJA power supply included).
5. The Hi5-3D will now run using the default factory settings. If you wish to
alter the factory settings, you’ll need to install the AJA Mini Config software
on a computer, attach the Hi5-3D via USB to the computer, and then make
your changes. This process is detailed on the following pages.
