AJA HD10MD3, Руководство пользователя

Страница: 6 / 8

6
Output Selection
Matrix For Output
3 BNCs
The following table shows the combinations of DIP switch settings required to configure
the three BNCs below the SDI Output BNC.
Installation
Typically, HD10MD3 installation consists of the following:
1. disc5VDC from the convertor
2. configure the DIP switch for the desired equipment configuration and video formats
3. connect video equipment to the convertor BNCs
4. apply +5VDC power to the converter (AJA power supply model DWP)
Specifications
Output Format
DIP Switch
#1
DIP Switch
#2
DIP Switch
#3
1 Composite and 1 Y/C (Pedestal) RIGHT—
CMPSTE
N/A RIGHT
1 Composite and 1 Y/C (no pedestal) RIGHT—
CMPSTE
N/A LEFT
RGB LEFT—
CMPNT
RIGHT—RGB LEFT
RGB with pedestal LEFT—
CMPNT
RIGHT—RGB RIGHT
SMPTE component (BETA625)/
EBU-N10 LEFT—
CMPNT
LEFT—
YPbPr/
LEFT
BETA 525 component LEFT—
CMPNT
LEFT—
YPbPr/
RIGHT
Item Specification
Formats 1080i 50/59.94/60Hz
1080p/psf 23.98/24/25/29.97/30 Hz
720p 23.98/24/25/29.97/30/50/60Hz
(Automatic Configuration)
Inputs HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC
Outputs SDI, SMPTE 259M, 10-bit, BNC
YPbPr - SMPTE, EBU-N10, Betacam
RGB, NTSC, PAL, YC (S-Video), 10-bit
3 x BNC
Down Conversion Multi-point interpolation. 10-bit processing. 3:2 conversion
for 23.96/24p/psf inputs