AJA HD10CEA, Инструкция по установке и эксплуатации

Страница: 7 / 8

1
7
AJA HD10CEA SDI/HD-SDI to Analog Audio/Video Converter
Installation
Typically, HD10CEA installation consists of the following steps:
1. Ensure the HD10CEA is disconnected from power.
2. Connect equipment to the convertor BNCs and cable snake BNCs/XLRs.
3. Apply +5-18VDC power to the converter (AJA power supply model DWP or DWP-
U).
Specifications
Item Specification
Inputs SDI/HD-SDI w/Embedded Audio, 1x BNC
Formats Standard Definition inputs supported:
525i 29.97 and 625i 25
High Definition inputs supported:
1080p component 23.98psf/24psf
1080i component 50/59.94/60
720p component 50/59.94/60
Outputs SD Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB,
NTSC, PAL, YC (S-Video)
HD Video: YPbPr, RGB
Audio: 4 Channel Balanced
Video/Audio Outputs on 25 Pin D Connector
2 SDI/HD-SDI Equalized Loop-Thru, 2x BNC
User Controls External Dipswitch
Video Format
Pedestal
H/V Blanking
Audio Group 1 - 4
Audio Level (adjustable via switch selection):
+24, +18, +15, +12 dBu, Full Scale Digital
Size 5.8” x 3.1” x 1” (147 x 79 x 25mm)
Power +5-18VDC, Regulated, 4 Watts
Requires Power Supply (AJA power supply model DWP or
DWP-U recommended)
USO
RESTRITO