HB-T-HDMI & HB-R-HDMI v1.0
www.aja.com
7
Installation
Typically, HB-T-HDMI & HB-R-HDMI installation consists of the following steps:
1. Ensure the converters are disconnected from power
2. Connect the HDMI source signal to the HDMI input connector of the HB-T-HDMI and
the transmission CAT cable to the HDbaseT output connector
3. Connect the other end of the CAT cable to the HDbaseT input connector on the
HB-R-HDMI
4. Connect RS-232 and IR input/output extension cables to the 1/8” TRS connectors
(optional cable kit is available from AJA)
5. Apply power to the converter (AJA power supply included).
The cable types in the table below are recommended for maximum performance reach
and full -capacity by the HDbaseT Alliance.
NOTE:
For detailed performance specifications of cable types at supported Display Resolutions,
see
" HB-T-HDMI & HB-R-HDMI Formats on page 8"
.
Figure 3. Typical System Interconnect Diagram
Table 1. Recommended Cables for Ultra-HD video transmission
Type
Manufacturer
URL
CAT7 S/FTP
Teldor
http://www.teldor.com/
CAT6A H/STP
Teldor
http://www.teldor.com/
CAT.7
Earthline
http://products.lappgroup.com/online-catalogue/
data-communication-systems-for-ethernet-
technology/
HDbaseT
up to
100 meters
HDMI Source
HDMI
Destination
Digital Video
Monitor
RS-232 bi-directional
control data
RS-232 bi-directional
control data
IR Extender Out
IR Extender In
IR Extender Out
IR Extender In
A/V Receiver