FS2 v2.1r1
www.aja.com
63
Video Input and
Output
This parameter performs input video source selection for the selected Video Processor (1
or 2). Multiple input sources are available at the connectors on the FS2 rear panel, but the
active input source routed to the selected Video Processor is the one you select here.
1 Video Input
Source Memory
Changing the Video Input selection automatically selects new values for Proc Amp
parameters (11.1 through 11.4) and Color Corrector (RGB) parameters (12.0 through
12.9). Each video source remembers its own Proc Amp and Color Corrector settings. This
is referred to as Source Memory.
Audio Source Memory
If AUDIO 3 Audio Follow Video is set to On, changing the Video Input selection will also
automatically select new values for all audio parameters associated with Audio Follow
Video (see the list provided in the description of parameter AUDIO 3 Audio Follow Video).
Audio Source Memory is enabled only when AUDIO 3 Audio Follow Video is set to On.
Dual Link
Dual Link referred to here is 1080p50/59.94 on two 1.5 Gb HD-SDI connections. Selecting
Dual Link as the Video Input for Video Processor 1 or 2 will allocate both SDI Inputs for
Dual Link use. Both Processors can use the Dual Link Input, or if only one Processor is
using it, the other Processor is free to select another input. The Fiber inputs operate the
same way.
2 Output Format
This parameter defines the output format of the Video Processor (1 or 2). Available
choices depend on the frame rate selection. The frame rate is set by the
Frame Rates
parameter (
System
menu 9).
Output Format Selection
Constraint
Available frame rates depend on System 9 Frame Rates parameter setting.
Output Follow Ref Exception
If the parameter 2 Output Format is set to Follow Ref, and the 8 Genlock Source is set to
Input, and the 1 Video Input is set to select one of the analog inputs, the output format
will follow the input format rather than the format of the signal on the Ref BNC as might
be expected. (This combination of settings effectively disconnects the Ref BNC.)
Output Timing Memory
Changing the Output Format selection automatically selects new values for H & V timing
parameters (14.1 Output Timing H, 14.2 Output Timing V and 14.3 Analog Output Fine).
Each Output Format mode remembers its own H and V timing settings.
SDI1
(default)
SDI2
SDI DualLink
Fiber1
Fiber2
Fiber DualLink
HDMI
Composite
Component
Select SDI1 as the input source.
Select SDI2 as the input source.
Select SDI DualLink, linking both SDI inputs as the input source.
Select Fiber1 as the input source.
Select Fiber2 as the input source.
Select Fiber DualLink, linking both Fiber inputs as the input sources.
Select the HDMI input as the input source.
Select Composite as the input source.
Select Component as the input source.
Follow INPUT
(default)
Follow REF
525/625<frame rate>
720p<frame rate>
1080i<frame rate>
1080PsF<frame rate>
1080p<frame rate>
2K1080p<frame rate>
Follow the format of the selected input.
Follow the format of the reference input (Ref ).
Select 525/625 SD as the Video Processor output.
Select 720p HD as the Video Processor output.
Select 1080i HD as the Video Processor output.
Select 1080PsF HD as the Video Processor output.
Select 1080p HD as the Video Processor output.
Select 2K1080p HD as the Video Processor output.
USO
RESTRITO
