AJA FS2 Скачать руководство пользователя | Manualshive

Страница: 11 / 125

background image

FS2 v2.1r1

www.aja.com

11

• HDMI I/O supporting 3D HDMI output.

• Component/Composite analog HD/SD video I/O, 12-bit.

• Looping reference input with flexible genlock.

3G Support

The FS2 supports several types of 3G video (and some associated embedded audio):

• 1080p59.94/1080p50 in both SMPTE level A or level B

• Muxed 3G Video: two separate 720p/1080i video signals muxed into one 3G level B

signal

• Dual-Link Video in the form of 1080p59.94/1080p50 video on two 1.5G SDI cables.

In the case of Dual Link Video, the FS2 input processing can demux the two signals and
send them (each with their associated 16-channel audio) to the two processors. For
output, the FS2 can mux together the two video signals (and their audio) from the two
processors into a Dual Stream 3G video output.

Control of 3G functionality can be set to automatic (using ANC data format ID), or with
full manual control via the user interface.

Audio Features

• Dual audio processors, each supporting 16-channel audio with full channel mapping.

• 16-channel AES/EBU, 8-channel balanced analog I/O.

• 16-channel embedded audio I/O with full mapping.

• AFV (audio follows video) support.

Other Features

• Built-in front panel control via scrolling alphanumeric and graphical menu.

• Front panel LED status indicators for at-a-glance system monitoring.

• Linux operating system supporting full network compatibility, including Web-based

remote control over 10/100/1000 Ethernet via an internal web server.

• Two fully redundant power supplies standard.

• Five-year international warranty with unlimited technical support.

Typical Applications

The FS2 can be used in a very wide variety of video and audio signal conversion,
adaptation, timing, and processing applications:

• Up/down/cross conversion between many SD and HD formats, including 1080p50/60.

• General purpose video frame synchronization.

• Analog-to-Digital and Digital-to-Analog audio/video conversion.

• Mux or Demux two separate HD signals from one 3G SDI signal.

• Convert 3G/HD/SD video over fiber to/from SDI (BNC).

• Use the built-in video processing amplifiers to adjust and/or color correct.

• Synchronize the timing of key and fill signals by putting both through the parallel FS2

video processors and adjusting their timing independently. Then key them using one
of the two FS2 keyers or an external keyer.

• Use the HDMI input and a DVI-to-HDMI cable to scan-convert popular computer video

formats to SD or HD, including full proc-amp functionality and aspect ratio adjustment.

• HD sidebar keying including using both SD video and SD sidebar graphics (analog or

digital), upconverting both, and combining—all in the FS2.

USO

RESTRITO

«
...
9
10
11
12
13
...
»

Содержание FS2






























































































































Отзывы:

Нет отзывов

Похожие инструкции для FS2

MediaLounge DSM-520

Бренд: D-Link Страницы: 2

Бренд: Xantrex Страницы: 152

Бренд: NAD Страницы: 22

Бренд: A-iPower Страницы: 2

Бренд: A-Designs Страницы: 7

Бренд: D&H Страницы: 70

Бренд: Vacon Страницы: 6

Бренд: Yamaha Страницы: 30

Бренд: Icy Box Страницы: 2

Бренд: Allen-Bradley Страницы: 4

Бренд: La Marche Страницы: 32

Бренд: Cable-Tronix Страницы: 4

ROTAPULS CK61 Series

Бренд: Lika Страницы: 2

Бренд: World Friendship Страницы: 17

EZWALL-pro 3x3 v3

Бренд: SmartAVI Страницы: 14

DMX SPLITTER 8R

Бренд: GLG Страницы: 2

Бренд: DAB Страницы: 18

Frenic Mini FRN001C1E-2U

Бренд: Fuji Electric Страницы: 196

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды