FS2 v2.1r1
www.aja.com
49
Example of a Serial
Recall
The advantage of using
GPI IN Response
with presets is that you can trigger a series or
even a looping series of preset recalls. For example, suppose
GPI IN 1 Response
in Preset 1
is set to Preset 2, and
GPI IN Response
in Preset 2 is set to Preset 1. Triggering the GPI will
toggle between the two presets.
Example of an
Unintended Recall
Suppose you trigger
GPI IN 1
while the current
GPI IN 1 Response
parameter is set to
Preset 1. This recalls Preset 1 as expected. However, suppose Preset 1 contains a stored
GPI IN 1 Response
setting of
No Action
. If you trigger GPI IN 1 later, expecting to recall
Preset 1 again, the FS2 instead performs
No Action
. To prevent unexpected changes in
the
GPI IN Response
parameters, set these parameters as desired before storing presets; in
the example, set
GPI IN 1
to Preset 1 before you store Preset 1.
CONFIG Menu Group
The
CONFIG
Menu Group includes parameters for setting up the FS2’s network, system
name, SNMP, alarm, and screen saver configurations.
1 System Name
This parameter defines a unique name for the FS2. This same name is used both when
displaying systems via the web interface and when displaying the FS2’s screen saver.
Name Entry Procedure
Set the name as follows:
1. Push
ADJUST
momentarily to enter character editing mode.
2. Turn
SELECT
to advance the blinking cursor to each character.
3. Turn
ADJUST
to scroll through the choices for each character. These characters are
allowed: A through Z (uppercase), a through z (lowercase), numerals, hyphen (-),
period (.), and space (blank). Leave the desired character selected and advance to the
next one.
4. Push
ADJUST
to save and activate the name after all characters are defined.
• To abandon changes before saving, push
SELECT
.
• To return to the default name at any time, hold down
ADJUST
.
NOTE:
To eliminate trailing characters to shorten an existing system name, overwrite them with a
hyphen (-) or space.
2.1 IP Config
This parameter determines the type of TCP/IP network configuration used by the FS2.
Consult your network administrator about how to set this value.
Variable
Set the system name, up to 20 characters.
Default:
aja-fs2
DHCP
(default)
Static Addr
Select automatic IP address assignment from the LAN DHCP server. If
the FS2 cannot find a DHCP server, it fails over to the static IP address.
Assign a static IP address manually (using parameters 2.2, 2.3, and 2.4).
The factory default static IP address: 192.168.0.2
USO
RESTRITO
