FiDO 12G Series SDI/Optical Fiber Mini-Converters v1.2 7
www.aja.com
2 Independent
Channels of
12G/6G/3G/
HD/SD-SDI
Output
Output
2 simplex or
1 duplex
connection
(LC connector)
Input
Input
NOTE: Green illuminated LEDs labeled OPT or SDI indicate a signal has been detected
and locked for that input.
NOTE: The OPT indicator for optical receivers may flicker or glow dim with the optical
input disconnected.
Installation
NOTE: AJA does not support use of any SFP modules other than our own; use of any non-
AJA SFP module will void the warranty.
Installation consists of the following steps:
1. Connect video equipment to the FiDO converter BNCs.
2. Connect fiber to the FiDO Optical fiber connectors.
Caution! Single-Mode (1310 nm) and CWDM FiDO devices require the use of “single
mode 1310nm compatible” fiber optic cable.
CLASS 1
LASER
PRODUCT
Warning! Active fiber-optic cables emit radiation invisible to the human eye. Do
not look directly at the end of an active fiber-optic cable or the fiber connector
on a FiDO-TR-12G, FiDO-T-12G, FiDO-2T-12G; these models are Class 1 Laser
Products.
3. FiDO-TR-12G, FiDO-2T-12G, and FiDO-2R-12G require either a duplex LC
cable or two simplex LC cables. Insert each connector until it latches.
