DRM-R1 Mini-Converter Rack-Mount Frame v1.2
www.aja.com
8
Figure 4. Mounting Converters in the DRM-R1 Frame
Optional Front
Cover Installation
The DRM-R1 front cover is available as an option. The cover has a slot on its rear side that
inserts into a flange on the lower front surface of the chassis (
).
Figure 5. Optional Front Cover
1. Clear any internal power cables from the chassis flange.
Small Slot
Lar
ge Slot
Small Slot
Lar
ge Slot
Small Slot
Lar
ge Slot
Small Slot
Lar
ge Slot
Small Slot
Lar
ge Slot
Small Slot
Lar
ge Slot
The 6 large slots take smaller or larger converters
The 6 small slots take only smaller converters
DRM-R0 FRAME TOP VIEW
Wing-nut
Select small or medium
standoff, depending
on converter size.
Position star washer
and standoff over
hole between
converters. Tighten
standoff to frame
by inserting screw
from underneath.
Frame underside
Frame inside
Place clamp
over converters
and screw wingnut
into standoff
through hole in
clamp.
Smaller
Converters
Front
View
Front
View
Larger
Converters
Frame underside
Frame inside
Place clamp over
converter, insert
screw through clamp
and tighten.
Select medium or long
standoff, depending
on converter size,
Position star washer
and standoff over
hole between
converters. Tighten
standoff to frame
by inserting screw
from underneath.
P
o
w
er Supply
Power
Connectors
Power
Chassis
Flange
Slot on Back
of Cover
