1
3
AJA D10CEA SDI to Component/Composite Converter User Manual — Introduction
Introduction
The D1OCEA converts SDI video with embedded audio to 10-bit component or
composite analog video and 4 channel balanced analog audio. The video outputs can
be configured as YPbPr (Betacam or SMPTE/EBU N10), RGB, composite or Y/C
(S-Video). Two re-clocked loop-thru SDI outputs are also provided. This versatile
low-cost converter is ideal for video/audio monitoring.
The 4 channel analog audio outputs can be wired in a balanced or unbalanced
configuration. All audio output channels can be selected as group 1-4 from SMPTE
embedded audio. You have four settings of Audio level to choose from.
Output connections for video and audio are available on a 25 pin “D” subminiature
connector. A break-out cable is supplied with the converter for this purpose.
You can configure video and audio from a DIP switch accessed through a cut-out in
the converter’s case.
Features
•
SDI to analog audio and video converter
•
SDI with embedded audio input
•
2 re-clocked, loop-thru SDI outputs
•
10-bit component or composite analog video outputs
•
4 channel balanced analog audio output
•
Selectable audio level
•
Selectable audio channel group
•
External DIP switch user interface for configuration
Block Diagram
D10CEA SDI Video with Embedded Audio Converter, Block Diagram
Serial
Video
with Embedded Audio
In
Filter
Audio
Filter
Filter
DIP
Switch
User
Interface
for
Feature
Selection
Video and
Audio D/A
ReClock
COMPONENT OUTPUTS (selected by DIP switch)
Serial Video Out 1
Serial Video Out 2
COMP
Break-out
Cable
Y
C
Clocked Loop-through SDI Outputs
B
G
R
Y
Pb
Pr
Channel 1 Right
Channel 1 Left
Channel 2 Right
Channel 2 Left
