KONA LH Capture, Display, Convert v14.3 30 www.aja.com
Audio Input
This pulldown menu allows you to pick where the audio comes from. KONA
supports up to 8 channels of embedded audio. You can choose from the 16
channels embedded in the SDI, which 8 to bring in (1-8 or 9-16). Here, if only two
channels were selected in the third-party application you are using, you can
select which two channels from the eight embedded will be mapped to that
application.
SDI Output Screen
Figure 16. AJA Control Panel, SDI Output Screen
The SDI Out Screen shows the current settings for the SDI output(s). Because the
outputs can be configured independently, one output may be the Primary format
and the other output may be the Secondary format. If an input/output has no
video, it will be indicated on the block diagram (“No Video”).
Select SDI Output 1
YUV
When selected, this indicates that the SDI output is set to the same format as the
framebuffer. That value will be listed in blue.
YUV Secondary
When selected, this indicates that the SDI output is set to a format different from
the framebuffer (Primary Format). That secondary format value will be listed
in green. This shows that active processing of the video is taking place (format
change and possibly up- or down-conversion).
