Fig. 4
Fig. 6
Fig. 7
Fig. 5
Step 4
Fig.4
Take out 16# (Support) from the package, take out 21# (Screw), 1# (Nut),
2# (Washer) from the spare parts carton N#.
Loose 8# (Screw), 2# (Washer), 21# (M10X80 Screw), 8# (M10X20 Screw) on
5# (Base), assemble according to Fig. 4 in order. Don’t twist the screws too
tightly firstly. After assemble all bolts, then tighten 21# (Screw), 8# (Screw),
12# (Screw) one by one.
Step 6
Fig. 6
Pull 51A# (Ram assembly) piston rod upwards to exposure the hole,
align 33# (Boom) and 51A # (Ram assembly) piston rod hole, then assemble
55# (Pin) and 52#(Spacer). Assemble 52# (Spacer) on 33# (Boom) the inside
side, fasten 57# (Snap ring).
Step 7
Fig.7
Loose 28# (Washer), 29# (Screw) of 58# (Post), take out 27# (Handle) from
spare parts carton N#, align 27# (Handle) and 58# (Post) holes, assemble 28#
(Washer), 29# (Screw), tighten 29# (Screw).
Installation is complete.
Step 5
Fig.5
Take out 33# (Boom) from package, then take out 57# (Snap ring), 56# (Pin),
52# (Spacer), 55# ( Pin) in order. Fasten 33# (Boom) end into 58# (Post).
Align the holes, then assemble 56# (Pin), fasten with 57# (Snap ring).
