AJ Aircraft Acuity, Руководство по сборке

Страница: 22 / 24

aj-aircraft.com Page 21
Cowl & Canopy
Install the canopy on to the fuselage.
The cowl will be mounted using 4 wood screws through 4
holes in the side of the fuselage just in front of the
firewall.
Place tape over the holes and past the front of the
firewall. Use a pin to poke though the tape and covering
locating the mounting hole. Peal the tape back away
from each hole but leave it attached to the fuselage.
Position the cowl onto the fuselage.
Align the motor shaft with the center of the cowl. (Use
the spinner’s back plate to help you center the cowl.)
Tape the cowl on in its final position. Transfer the hole in
the tape to the cowl with a pin. Use a 1/16” drill bit to
enlarge the hole in the cowl. Use 4 wood screws through
these holes to mount the cowl.