Aiwa VX-T149, Руководство по обслуживанию

Страница: 29 / 102

D2-4
ELECTRICAL ADJUSTMENTS
2-15: SUB CONTRAST
1.
2.
3.
4.
5.
6.
7.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (4) on the remote control to
select "PICTURE". The Fig. 2-6 appears on the display.
Press the channel button (2) on the remote control to
select "CONTRAST".
Press the PLAY or STOP button on the remote control
until the contrast step No. becomes "95"
Press the AV button on the remote control to set to the
AV mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (4) on the remote control to
select "PICTURE". The Fig. 2-6 appears on the display.
Press the channel button (2) on the remote control to
select "CONTRAST".
Press the PLAY or STOP button on the remote control
until the contrast step No. becomes "105"
2-16: SUB SHARPNESS
1.
2.
3.
4.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (4) on the remote control to
select "PICTURE". The Fig. 2-6 appears on the display.
Press the channel button (5) on the remote control to
select "SHARPNESS".
Check if the step No. of SHARPNESS is "28".
Press the AV button on the remote control to set to the
AV mode. Then perform the above adjustments 1~3.
2-17: OSD CONTRAST
1.
2.
3.
4.
Using the remote control, set the brightness and
contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (4) on the remote control to
select "PICTURE". The Fig. 2-6 appears on the display.
Press the channel button (6) on the remote control to
select "OSD CONT".
Check if the step No. of OSD CONT. is "50".
2-18: H. BLK
1.
2.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (1) on the remote control to
select "H/V". The Fig. 2-4 appears on the display.
Press the channel button (2) on the remote control to
select "H. BLK".
Switch the R/L by using the ENTER button on the
remote control and check if the H. BLK step No.
becomes "R2, L4".
2-19: V. S-CORRECTION (V. SC)
1.
2.
3.
4.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (1) on the remote control to
select "H/V". The Fig. 2-4 appears on the display.
Press the channel button (6) on the remote control to
select "V. SC 50/60".
Check if the step No. of V. SC is "0".
Press the AV button on the remote control to set to the
AV mode. Then perform the above adjustments 1~3.
2-20: V. COMP
1.
2.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (1) on the remote control to
select "H/V". The Fig. 2-4 appears on the display.
Press the channel button (7) on the remote control to
select "V. COMP".
Check if the step No. of V. COMP is "7".