NOTE FOR THE REPLACING OF MEMORY IC
If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to
ensure correct data settings while making reference to TABLE 1.
NOTE: Initial Data setting will not be possible if clock has been set. To reset clock, either unplug AC cord and allow
at least 5 seconds before Power On.
Table 1
1.
2.
3.
Fig. 1
ADDRESS is now selected and should "blink". Using the SET + or - keys on the remote, step through the ADDRESS until
required ADDRESS to be changed is reached.
Press ENTER to select DATA. When DATA is selected, it will "blink".
Again, step through the DATA using SET + or - until required DATA value has been selected.
Pressing ENTER will take you back to ADDRESS for further selection if necessary.
Repeat steps 4 to 7 until all data has been checked.
When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.
4.
5.
6.
7.
8.
9.
The unit will now have the correct DATA for the new MEMORY IC.
Enter DATA SET mode by setting VOLUME to minimum.
While holding down VOLUME button on front cabinet, press key 6 on remote control simultaneously.
ADDRESS and DATA should appear as FIG 1.
INIT 00 83
0010
0003
POWER ON
PLAY/REC
ADDRESS
DATA
C4-1
ADDRESS
DATA
00
80
01
6D
02
21
03
00
04
00
05
00
06
A4
07
EB
08
39
09
90
ADDRESS
DATA
0A
1B
0B
B7
0C
CB
0D
01
0E
00
0F
06
10
6C
11
2B
12
21
13
15
ADDRESS
DATA
14
90
15
A0
16
7F
17
66
18
18
19
07
1A
44
1B
86
1C
8F
1D
FC
ADDRESS
DATA
1E
42
1F
15
20
8D
21
05
22
11
23
00
24
39
25
04
26
00
27
1A
ADDRESS
DATA
00
28
19
29
