background image

3

GB

Precautions

On safety

Should any solid object or liquid fall into the
cabinet, unplug the system and have it checked by
qualified personnel before operating it any further.

On power sources

• The system is not disconnected from the AC

power source (mains) as long as it is connected
to the wall outlet, even if the system itself has
been turned off.

• If you are not going to use the system for a long

time, be sure to disconnect the system from the
wall outlet. To disconnect the AC power cord
(mains lead), grasp the plug itself;  never pull
the cord.

• AC power cord must only be changed at the

qualified service shop.

On placement

Do not place the system in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.

On adjusting volume

Do not turn up the volume while listening to a
portion with very low level input (soft sound) or
no audio signal. If you do, the speakers may be
damaged when a peak level portion is played.

On cleaning

Clean the cabinet, panel and controls with a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or
benzine.

If you encounter colour irregularity
on a nearby TV screen

This speaker system is magnetically shielded for
placement near a TV set. However, depending on
the TV set, colour irregularity may be observed on
the TV screen.

If colour irregularity is observed...

Turn off the TV set, then turn it on again in 15 to
30 minutes.

If colour irregularity persists...

Place the speakers farther away from the TV set.

If colour irregularity is observed
again and continuously...

Do not place magnetic objects near the speakers
as magnetic interaction between them may cause
colour irregularity on a nearby TV screen.

Magnetic objects ...

Racks, magnets attached to the doors, health
appliances, magnets used for toys, etc.

If you have any questions or problems concerning

your system, please consult your nearest Aiwa

dealer.

Содержание UZ-US501





























Отзывы: