– 16 –
PAGE 1
1-1.
H POS Horizontal Positioning Adjustment / Adjustment Menu Screen : PAGE 1-1
Input Signal : Crosshatch
Measuring Instrument : Pattern generator / reader : LCG-401
•
Use the volume keys on the jig remote controller to adjust the dot mark in the centre of
crosshatch screen to the exact centering position by allocating an equal number of squares
on the left and right side of the dot. (Fig. 1-1)
1-2.
V POS Vertical Positioning Adjustment / Adjustment Menu Screen : PAGE 1-2
Input Signal : Crosshatch
Measuring Instrument : Pattern generator / reader : LCG-404
•
Using the volume keys on the jig remote controller to adjust the
dot mark to the exact vertical centre position in the crosshatch screen.
(Fig. 1-2)
V LINEARITY Vertical Linearity Adjustment
Input Signal : Monoscope (LION MARK)
Measuring Instrument : Monoscope / NTSC
•
Adjust the 6 circular figures on monoscope to be true circles by SFR501.
<Simple Adjustment>
Input Signal : Crosshatch
Adjustment Location : SFR501
Measuring Instrucment : Pattern generator / NTSC
•
Adjust the SFR501 to make crosshatch patterns square.
*
Adjust V POS (PAGE 1-2) and Linearity repeatedly. If it does not work, adjust V Size
(PAGE 1-3) first and try the adjustment again.
1-3
V SIZE Vertical Size Adjustment / Adjustment Menu Screen : PAGE 1-3
Input Signal : Crosshatch
Measuring Instrument : Pattern generator / reader : LCG-401
•
Use the volume keys on the jig remote controller to adjust the number of
the squares of the crosshatch pattern to 13~14. (Fig. 1-3)
PAGE 1
V POS
18
13 ~ 14
Squares
CRT center
mark
PAGE 1
V POS
2
Fig. 1-1
Fig. 1-2
Fig. 1-3
PAGE 1
H POS
20
8~9
8~9
Center
