Aiwa RC-ZAS01, Руководство по обслуживанию

Страница: 26 / 27

38 37
REF. NO PART NO. KANRI DESCRIPTION
NO.
SPEAKER (SX-NBL40) <44EZ, 44K, NDR6EZ> PARTS LIST
REF. NO PART NO. KANRI DESCRIPTION
NO.
SPEAKER (SX-NBL42) <46EZ> PARTS LIST
REF. NO PART NO. KANRI DESCRIPTION
NO.
SPEAKER (SX-NSZ53) <44G> PARTS LIST
1 8A-NSJ-001-010 PANEL,FR R
2 8A-NSJ-002-010 PANEL,FR L
3 8A-NSJ-008-010 PROTECTOR,TWA
4 8A-NSJ-024-010 GRILLE,FRAME ASSY L
5 8A-NSJ-004-010 GRILLE,FRAME
6 8A-NSJ-006-010 BADGE,AIWA S35
7 87-NS7-611-010 CORD,SPKR
8 88-MS1-608-010 SPKR, CERAMIC
9 8A-NSX-602-010 SPKR, W 140
10 8A-NSK-604-010 SPKR,TW 60
1 8A-NSX-001-010 PANEL,FR
2 8A-NSX-014-010 PANEL,BA L
3 8A-NSX-015-010 PANEL,BA R
4 8A-NSX-016-010 PANEL,DUCT
5 8A-NSX-003-010 GRILLE,FRAME ASSY
6 8A-NSX-010-010 PANEL,TW R
7 8A-NSX-011-010 PANEL,TW L
8 8A-NSX-012-010 PROTECTOR, TW R
9 8A-NSX-013-010 PROTECTOR, TW L
10 87-NS7-611-010 CORD,SPKR
11 8A-NSX-602-010 SPKR, W 140
12 8A-NSK-604-010 SPKR,TW 60
13 87-NSH-612-010 SPKR,CERAMIC ASSY
1 8A-NSX-001-010 PANEL,FR
2 8A-NSX-014-010 PANEL,BA L
3 8A-NSX-015-010 PANEL,BA R
4 8A-NSX-016-010 PANEL,DUCT
6 8A-NSX-010-010 PANEL,TW R
7 8A-NSX-011-010 PANEL,TW L
8 8A-NSX-012-010 PROTECTOR, TW R
9 8A-NSX-013-010 PROTECTOR, TW L
10 87-NS7-611-010 CORD,SPKR
11 8A-NSX-602-010 SPKR, W 140
12 8A-NSK-604-010 SPKR,TW 60
13 87-NSH-612-010 SPKR,CERAMIC ASSY
REF. NO PART NO. KANRI DESCRIPTION
NO.
REF. NO PART NO. KANRI DESCRIPTION
NO.
Fig-1 Fig-2
Fig-3
1 3
2
SPEAKER DISASSEMBLY INSTRUCTIONS
Type.4
How to Remove the PANEL, FR
1. Insert the ( – ) flat head screwdriver tip into the gap
between the PANEL, FR and the PANEL, SPKR. Tap the
head of the ( – ) flat head screwdriver with the plastic
hammer head, and create the clearance as shown in Fig-1.
2. Insert the cut chisel in the clearance, and tap the head of
the cut chisel with plastic hammer as shown in Fig-2, to
remove the PANEL, FR.
3. Place the speaker horizontally. Tap head of the cut chisel
with plastic hammer as shown in Fig-3, and remove the
PANEL, FR completely.
How to Attach the PANEL, FR
Attach the PANEL, FR to the PANEL, SPKR. Tap the four
corners of the PANEL, FR with the plastic hammer to fit the
PANEL, FR into the PANEL, SPKR completely.
Type.1
Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Remove the screws of each speaker
unit and then remove the speaker units.
Type.2
Remove the grill frame and four pieces of rubber caps by pulling
out with a flat-bladed screwdriver. Remove the screws from hole
where installed rubber caps. Insert a flat-bladed screwdriver into
the position indicated by the arrows and remove the panel. Re-
move the screws of each speaker unit and then remove the
speaker units.
Type.3
Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Turn the speaker unit to counter-
clockwisedirection while inserting a flat-bladed screwdriver into
one of the hollows around speaker unit, and then remove the
speaker unit. After replacing the speaker unit, install it turning to
clockwise direction until "click" sound comes out.
TOOLS
1 Plastic head hammer
2 ( – ) flat head screwdriver
3 Cut chisel
All manuals and user guides at all-guides.com
all-guides.com