15
En
Auto Graphic equalizer (AG)
The unit automatically selects a sound equalization curve to
match the music program type (PTY) data being transmitted
from the station. (e.g. 'POP' curve is selected for POP M [PTY].)
Press AG when tuning in to an RDS station.
"
AG
" lights up.
To cancel AG function
Press AG so that "
AG
" disappears.
Clock-time (CT)
You can automatically set and update the clock on the hour
every hour just by tuning in an RDS station since RDS stations
transmit clock signals.
1
Press RT repeatedly to select "
CT ON
" while the
unit is on and the time is displayed (see "Setting
the clock").
2
Tune in an RDS station.
To deactivate CT function (If the clock is set wrongly
due to an incorrect clock signal)
Repeat step 1 to select "
CT OFF
".
Adjustments
Antennas
Keep antennas away from metallic objects, electrical equipment
and cords.
FM antenna: Extend fully and position for the best reception.
If receiving condition is poor, connect optional outdoor antenna
to FM 75
Ω
terminal.
MW/LW antenna: Rotate to find best reception.
To switch to monaural FM reception
Press SHIFT+TUNER MODE on the remote control. With each
press, "
MONO
" and "
STEREO
" are displayed alternately
on the display.
Tip:
When FM stereo reception is poor, switching to monaural
reduces noise.
To switch the MW tuning interval
Hold down BAND and press POWER on the unit. With each
press, the MW tuning interval alternates between 9 kHz/step
and 10 kHz/step.
Tip:
The default is 9 kHz/step. Change it only when using the unit
in a 10 kHz/step area. Switching MW tuning interval clears all
the preset stations.
Note on RDS features
The RDS features described above may not function correctly
if the RDS transmission data from the station contains too
much interference or the reception signal is too weak.
