Aiwa JAX-N20, Руководство по эксплуатации

Страница: 17 / 26

16
En
TAPE OPERATIONS
Playback
Use only TYPE I (normal) tapes.
1 Press TAPE A/B (SHIFT+TAPE A/B on the remote)
and insert the tape in either deck.
Press
z
PUSH EJECT to open the cassette holder, and
insert with the exposed side down and playback side
facing out from the unit. Push
z PUSH EJECT to close.
PUSH EJECT
2
Press d ( c / d on the remote).
To stop playback
Press
s
.
To pause playback (deck B only)
Press
a
. Press again to resume.
To fast forward or rewind
Press f or g .
To change the playback side (deck B only)
Press
d
in play mode.
To select a deck (deck A or deck B)
Press TAPE A/B (SHIFT+TAPE A/B on the remote) in stop mode
when tapes are loaded in both decks.
"
TP A " (deck A) or " TP B " (deck B) is displayed.
To reset the tape counter
Press
s
in stop mode, and the tape counter in the display is
reset to " 0000 ". Opening and closing the cassette holder
will also reset the tape counter.
To play continuously (deck A to deck B)
Load tapes in both decks and start playback on deck A. Then,
as soon as playback on deck A finishes, playback on deck B
will start without interruption.
To select a reverse mode (deck B only)
1 Press MODE repeatedly to display “ REV MODE ”, and
then press ENTER within 6 seconds.
2 Turn MULTI JOG within 6 seconds to select one of the three
reverse modes and then press ENTER.
-
REV P
: Plays only one side
-
REV [
: Plays from the front side to reverse side once
- REV
]
: Plays both sides repeatedly (up to 5 times)
On the remote, press PLAY MODE repeatedly until the desired
mode displays.
Notes on cassettes
•Use of a tape longer than 90 minutes is not recommended
since they are extremely thin and easily damaged. If you
should use it, do not change the tape operations such as
play and stop frequently.
•Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may get entangled in the deck
mechanism and become damaged.
Basic recording
Use only TYPE I (normal) tapes. Deck B is the recording deck.
Only one side of the tape can be recorded at a time.
1 Insert the recordable tape in deck B.
Press
z
PUSH EJECT to open the cassette holder, and
insert with the exposed side down and the side to be
recorded on facing out from the unit.
Wind up the tape to the desired point if needed.
2 Selects a reverse mode with MODE, ENTER, and
MULTI JOG.
3
Prepare the source.
To record CD(s), select the CD function and load disc(s).
To record a radio program, tune in to the desired station.
To record a tape, insert the source tape in deck A and
select the TAPE (deck A) function.
To record from connected external equipment, select the
VIDEO/AUX function and prepare the equipment.
DISC DIRECT
PLAY 1-3
PUSH EJECT
REC/
REC MUTING
TAPE A/B
SYNC DUB
MULTI JOG
PUSH EJECT
EDIT
SHIFT
1–0/10,
+10
DISC SKIP
TAPE A/B
MODE
ENTER
PLAY MODE
Deck A
Deck B