background image

10

En

This unit plays back finalized CD-R/RW discs as well as audio
CDs.

* Open the control panel with PANEL OPEN/CLOSE if needed.

Playback

1

Press CD and load disc(s)

Press 

z

CD OPEN/CLOSE to open the disc compartment

and place one or two disc(s) with the labeled side up.
To place three discs, press DISC CHANGE so that the trays
rotate, then place the third one. Lastly, close the
compartment with 

z

CD OPEN/CLOSE.

• When loading an 8-cm (3-inch) disc, place it on the

inner circle of the tray.

2

To play all discs, press 

c

.

To play one desired disc, press DISC DIRECT
PLAY 1-3.

To stop playback

Press 

s

.

To pause playback

Press 

a

. Press again to resume playback.

CD OPERATIONS

To skip to the beginning of the current/preceding/
succeeding track

Press 

f

 or 

g

 repeatedly or turn MULTI JOG.

To search (playback in fast forward or fast reverse)

Hold down 

f

 or 

g

. Release at the desired point.

To select a track with the remote control

Press DISC DIRECT PLAY 1-3 to select a disc and then press
the numbered buttons to select a track.
- To select track 25, press +10, +10 and 5.
- To select track 10, press +10 and 0.

To display the remaining playback time of the CD

Press CD EDIT/CHECK (SHIFT+CD EDIT/CHECK on the
remote control). Press again to return to the elapsed time
display.

•Remaining playback time cannot be displayed during

random playback or programmed playback.

To replace disc(s) during playback without
interruption

While one disc is being played back, press DISC CHANGE so
that the compartment opens, replace disc(s) with other one(s),
and press DISC CHANGE to close the compartment.

Random/Repeat playback

Random playback plays all the tracks on one desired disc or all
the discs in random order. Repeat playback plays all the tracks
repeatedly on one desired disc or all the discs.

1

Press SHIFT+RANDOM/REPEAT repeatedly on
the remote control to select one of the following
modes:

- Random playback: "

RANDOM

" lights up.

- Repeat playback: "

"

" lights up.

- Random and repeat playback: "

RANDOM

" and "

"

"

lights up.

2

To play one desired disc, press DISC DIRECT
PLAY 1-3.
To play all discs, press 

c

.

To cancel random/repeat playback

Press SHIFT+RANDOM/REPEAT repeatedly on the remote
control so that both "

RANDOM

" and "

"

" disappear on

the display.

To repeat a selected set of tracks

Select the tracks with programmed playback, then press
SHIFT+RANDOM/REPEAT on the remote control to select
repeat playback.

• It is impossible to play a selected set of tracks in random

order.

Содержание CX-NAJ700























Отзывы: