en
12
13
USB MODE
PLAYING MUSIC VIA USB
This boombox has been developed using
the latest technical advances in the USB
field. However, given the wide range of USB
storage device types that are currently in the
market, we unfortunately cannot guarantee
full compatibility with all of them. For this
reason, in rare cases, there may be problems
playing files from some USB storage devices.
This is not due to device malfunction.
1.
Slide the
MODE
switch to the
CD-USB-
BT-AUX
position to turn on the unit.
2.
Press and hold the
USB/BT/
button
until the “
USb
”,
USB MODE INDICATOR
appears flashing on the left of the display.
3.
Connect a USB storage device directly
to the
USB/MP3
port. The display briefly
shows the number of folders and then
the total number of tracks. Playback will
automatically start after a few seconds.
4.
To temporarily stop playback, press the
button, and press it again to resume
playback.
5.
Press the
or
buttons to select a
different track number
.
Press and hold the
or
buttons to find
a specific passage within the track and
release it at the point you want to listen to.
6.
Press the button to stop playing.
Notes:
•
If the USB is not compatible, or there is
no USB storage device connected, the
display will show the word “NO”.
•
Because some storage devices have a
large capacity, USB access time is a little
longer.
•
If the playlist reaches the maximum
number of tracks the display will show
the word
"FUL"
(FULL)
.
•
Switch the device to a different operating
mode before you remove the USB storage
device.
•
To avoid damaging the boombox or other
devices, do not try to charge any external
device using the USB port.
CREATING A USB PLAYLIST
The Program feature may be used to program
up to 99 tracks for the USB mode too, in a
programmable playlist.
1.
While in stop mode only (no USB playback),
press
PROG
, and the LCD display will show
the wording
“P01”
and the
“
PROGRAM
”
indicator.
2.
Press the
or
buttons to allocate the
desired track.
3.
Press the
PROG
button to select and store
the track into the memory.
The program sequence will change to
“P02”
to choose the next track.
4.
Repeat steps 2 and 3 to select up to 99 tracks.
Once the last track has been added, the
LCD display will automatically show the
programmed tracks one by one, starting
with the first one that was programmed.
If you want to create a playlist with less
than 99 tracks, press twice the
PROG
button after confirming your last track.
5.
To play the selected tracks (in the program
mode), press the
button.
6.
Press the
button to hear the previous
programmed track or press
to hear the
next programmed track.
7.
To clear the programmed tracks from the
memory, press the button twice or change
to another function mode.
LISTEN TO YOUR TRACKS REPEATEDLY
Press the
REPEAT
button on the front panel
repeatedly to activate the
REPEAT FUNCTIONS
in the following order:
1.
*FLASHING
(repeat the current track)
2.
FOLDER
(repeat all the tracks of
the current USB folder)
3.
(repeat all the available tracks)
4.
RANDOM
(play randomly all the tracks
in the USB)
5.
OFF
(cancel the repeat/random function)
BLUETOOTH
MODE
BLUETOOTH
PAIRING
Prior to using the
Bluetooth
function, your boombox should be paired first with your
Bluetooth
device.
(“Pairing” means establishing connection between Bluetooth devices such as mobile phones,
tablets, pc, etc).
1.
Slide the
MODE
switch to the
CD-USB-BT-
AUX
position.
(fig. 1)
2.
Press and hold the
USB/BT/
button
until the “
bt
”
(Bluetooth)
function mode
appears on the display.
(fig. 2)
3.
In
Bluetooth
mode, a voice prompt will
announce
Bluetooth
pairing mode.
The
BLUETOOTH
MODE LED INDICATOR
will start flashing in blue.
And the boombox will search automatically
for
Bluetooth
devices.
4.
Turn on the
Bluetooth
function on your
device and make it visible (see your
device's instructions to add or setup a
Bluetooth
device).
5.
Search for
Bluetooth
devices and select
AIWA BBTU-300
Enter the code
“0000”
if needed.
(fig. 3)
If the devices are paired successfully, the
BLUETOOTH
MODE LED INDICATOR
will
keep bright, and a prompt voice will notify
that the
Bluetooth
device is connected.
Having paired successfully, the device will
connect automatically next time.
6.
Press and hold
PAIR
to disconnect the
currently paired
Bluetooth
device.
(fig. 4)
PLAY FROM A
BLUETOOTH
DEVICE
1.
Press the
button to play.
2.
To pause or resume play, press the
button again.
3.
Press the
or
buttons to select a
different track number.