TV Type:
Used to select the color system that
corresponds with both NTSC and PAL
TV system.
PAL:
Select this if the connected TV is PAL
system. It will change the video signal of
a NTSC disc and output to PAL format.
NTSC:
Select this if the connected TV is
NTSC system. It will change the video signal
of a PAL disc and output to NTSC format.
Auto:
Change the video signal output
automatically according to the playing disc
format.
Audio:
Selects an audio language (if
available).
Subtitle:
Selects a subtitle language(if
available).
Disc Menu:
Selects a
d
isc menu
language (if available).
Dolby Setup Page:
Dual Mono
Dynamic
--Dolby Digital Setup --
Stereo
L-Mono
R-Mono
Mix-Mono
OFF
1/4
3/4
FULL
1/2
Dual Mono Setup:
This function is to set the ML/MR audio
output in different modes.
Stereo:
Select this mode when your DVD
player is connected to one stereo speaker
or TV with stereo audio inputs.
L-Mono:
Select this mode when your DVD
player is connected to a single channel
speaker or TV with mono audio input. The
player shall output L-channel audio only.
R-Mono:
Select this mode when your DVD
player is connected to a single channel
speaker or TV with mono audio input. The
player shall output R-channel audio only.
Mix-Mono:
Select this mode when your DVD
player is connected to a single channel
speaker or TV with mono audio input. The
player shall mix R/L-Channel audio into 1
channel to output.
Dynamic Setup:
This function is used to set dynamic output
level from OFF to FULL.
Component
Scan Mode
Quality
--VIDEO Setup Page --
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
P-Scan
Interlace
CVBS
YUV
Component Setup:
This function is used to set the component
video output or YUV mode.
Quality Setup:
Sharpness:
This function is used to set the
sharpness of picture high, medium or low.
Brightness:
This function is used to set
brightness of the picture. Highlight Brightness,
then press ENTER or button to enter
Brightness submenu, then press to set
brightness from-20 to +20. Press ENTER or
OK button to save and exit.
Contrast:
This function is used to set contrast
of picture. Highlight Contrast then press
ENTER or button to enter Contrast submenu,
then press to set contrast from-16 to +16.
Press ENTER or OK button to save and exit.
Gamma:
Press /▲/▼ to choose Gamma level:
None, Low, Medium, or High . Press ENTER to
exit.
Hue:
Press / to adjust the Hue data. Press the
ENTER to exit.
Saturation:
Press / to adjust the saturation
data and press ENTER to exit.
/
/
Preference Page:
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
PAL
AUTO
NTSC
--Preference Page--
PAL
ENG
OFF
ENG
English
French
German
Spanish
Itlian
Chinese
Japanese
Korean
English
French
German
Spanish
Itlian
Chinese
Japanese
Korean
English
French
German
Spanish
Itlian
Chinese
Japanese
Korean
1 KID SAF
2 G
3 PG
4 Pg13
5 PGR
6 R
7 Nc17
8 ADULT
Reset
Parental:
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set
a playback limitation level. The rating levels
are from 1 to 8 and are country dependent.
You can prohibit the playing of certain discs
that are not suitable for your children or have
certain discs played with alternative scenes.
Password:
This function is used to set Password Mode
On or Off and to change the password.
Highlight Password, then press ENTER or
button to enter Password Setup Page and set
Password Mode On or Off.
Password Mode
Password
--Preference Setup Page--
On
On
Off
Change
Highlight Password, then press to select
Change, then press ENTER or OK to enter
the following submenu:
--Preference Setup Page--
Old Password
New Password
Confirm PWD
OK
Old Password:
Enter the OLD password,
(factory setting is “0000") and the cursor will
jump automatically to New Password.
New Password:
Enter the NEW password.
Enter 4 digits from the remote control's
numeric buttons, and the cursor will
automatically jump to Confirm PWD.
Default:
Press to choose RESET, and
press ENTER to confirm. It will reset the
player to factory default setting.
Note: The set password will not be changed by
this reset.
When an audio CD is in the disc tray,
you can copy the audio from the CD
as audio files onto the inserted USB
memory stick. Press the "
button to commence.
CD Ripping
Video Setup Page:
COPY"
Содержание AMD-006
Страница 1: ......
