– 5 –
3. Removing the HLDR, BATT and PWB, MAIN
(1) Remove the screw “a” and remove the HLDR, BATT.
(2) Short the PICK-UP short land and remove the three connectors b.
(3) Remove the screw “c” and the three screws “d”, then remove the PWB, MAIN.
*1: Take extra caution when attaching the HOLD SW.
*2: Take extra caution when attaching the BAT-CONTACT. In addition, take extra caution when attaching the OPEN SW that is
located on the rear of the PWB, MAIN.
