Aiwa ACD325, Инструкция по эксплуатации, Страница: 7 / 12

5
To search for a particular passage during playback (track scanning at high speed)
Press and hold the TUN.+/ or TUN.- / Button to scan the current playing track at high
speed until desired point (passage) appears, then release the button for normal playback mode.
Playback will start again from this point.
To select a song with track number more than 10
（
for USB only
）
To select a song/track with number more than 10, press the 10/FOLD./M.+ or 10/FOLD./M.-
Button each time to skip forward 10 tracks, then press the TUN.+/ or TUN.- / Button to
select the desired track.
To select a desired folder (for USB that contains more than one folder)
To select a desired folder, press and hold the 10/FOLD./M.+ or 10/FOLD./M.- Button to tune to
the next or previous folder.
PROGRAMMING TRACKS
You can program individual tracks of discs when playback is stopped. Up to 20 tracks for CDs
and 99 tracks for USB can be stored in the memory in any order.
1. With playback stopped, press the
PROG./MEM. Button to enter program setting, the
‘P ’
logo
will flash on the Display and show
‘
P01
’.
2. Press the TUN.+/ or TUN.-/ Button to select the first desired track to be programmed
(for example, track 5).
3. Press the PROG./MEM. Button on unit again. The
‘P’
logo will flash on the Display and show
‘
P01
’.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the
/PAIR Button to start playback from the first programmed track.
6. Press the TUN.+/ or TUN.-/ Button to select the next or previous programmed track.
7. Press the STOP ( ) Button to stop program playback.
8. To clear the program, press STOP ( ) Button when the disc is stopped or open the CD
compartment lid
– the program will be erased.
REPEAT PLAY
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press RPT/RDM Button on the unit during play. The Display will show flashing
‘ ‘ and
the current track will be played over and over again till you press the STOP ( ) Button.
2. To cancel repeat play, press RPT/RDM Button until
‘ ‘ disappears from the Display.
To repeat all the Tracks
1. Press RPT/RDM Button until
‘ ‘ shows steadily on the Display. All tracks on the disc will
be played over and over again till you press the STOP ( ) Button.
2. To cancel repeat play, press the RPT/RDM button until
‘ ‘ disappears from the Display.
To repeat the folder (only for USB/MP3 discs which contain more than one folder)
1. Press the RPT/RDM Button until
‘ FOLDER ‘ shows steadily on the Display. The current
folder will be repeated over and over again till you press the STOP ( ) Button.
2. To cancel repeat play, press the RPT/RDM Button until
‘ FOLDER’ disappears from the
Display.