STEP 4
Attach brackets to each crossbar end using 4 pcs M6*12 screws.
STEP 5
Loosen the left nut from the driveshaft using wrench.Turn the left
nut counterclockwise to remove it from the driveshaft.Keep the
plastic grommet inside the left nut.
Left Nut
Right Nut
Center Rod
05
4mm Hex Spanner
M6*12 screw 4pcs
Tool Required
：
H
Hardware Required
：
B Screws
Tool Required
：
I
Wrench
Nut
