10
Interference in the Image and Sound
•
The
ProPC/TV Wireless
can transmit on four different channels. Try all four channels (set on Transmitter and Receiver) to find the cleanest, most
interference-free channel in your area.
•
Move your Transmitter and Receiver slightly to find the best reception position. Sometimes just moving them an inch or two will make a big difference in
reception quality.
•
Shorten the distance between your sender and receiver.
•
Microwave ovens, wireless home networking equipment and 2.4 GHz cordless phones all operate on the same frequency as the
ProPC/TV Wireless
, and may
cause interference. Try turning them off to eliminate interference.
•
Make sure your Transmitter and Receiver are on the same channel.
•
Picture on TV is too bright: If you are not connecting a PC monitor to the T-shaped VGA Bypass Cable, terminate the connection by attaching the 75 Ohm Load
Terminator to the Pass-Thru connector.
6. Specifications
Transmitter
VIDEO Input Level
：
1Vp-p, supports PAL and NTSC format
AUDIO Input Level
：
1Vp-p, stereo
Antenna
：
Dipole
Operating Temperature
：
-10
° to +60°
VIDEO Output Formant
：
PAL and NTSC format
2.4GHz wireless transmission
：
Frequency: 2400MHz - 2483MHz
Transmission Power: 10dBm
Channel Number: 4 (2414, 2432, 2450, 2468MHz
）
Frequency Stability: +-100KHz
Receiver
VIDEO Output Level
：
1Vp-p
AUDIO Output Level
：
1Vp-p, Stereo
Antenna
：
Dipole
2.4GHz Wireless Transmission
：
Frequency 2400MHz—2483MHz
Receiver Sensitivity -85dBm
Channel Number: 4
（
2414
，
2432
，
2450
，
2468MHz
）
Frequency Stability: +-100KHz
Warranties