4
Note 1:
On a NTSC system, the connector on the A/V equipment is an
RCA jack. Connect the yellow plug to the jack labeled VIDEO, the red
plug to the jack labeled AUDIO RIGHT and the white plug to the jack
labeled AUDIO LEFT.
Note 2:
If the A/V equipment has only one output for audio (mono
sound only), connect the white plug to that single audio output jack.
1.2 Power Supply
a.
Plug one end of the provided power adaptor into a wall outlet and
the other end into the rear of the transmitter. See Fig. 6.
b.
Turn on the transmitter. The LED on the front of the unit should
light up.
2. Setting up the Receiver
2.1 Connect the Receiver to a TV
A/V Connect – for TV with A/V Input Jacks
Connect the mini-plug of the provided A/V cables to the A/V jack on the
rear of the receiver; connect the other end of the cable to the A/V jacks
on the TV labeled LINE IN. See Fig. 7.
POW ER
ON-OFF
Transmitter
Fig. 6
Wall Outlet
