AIS IP10IA99 series Скачать руководство пользователя

Страница: 19 / 77

OIC Panel 10

”

/15

”

/17

”

- User Manual (Ver.1.02)

Page 18

5.1.1 10.4"/15"/17" Display with Touch Screen

Depending on the ordered

perator

nterface

omputer 10"/15"/17” NEMA4 panel system, IP10IA99 / IP15IA99 /

IP17IA99, the built-in display is a 10.4" or 15" or 17” display. For technical specification of the built-in display, please

refer to the section of “Technical Data” in this manual.
The display is designed with a 5-Wire Resistive Touch Screen. The surface of the display is also mechanically

protected through the touch screen. The touch screen (USB interface) registers contacts of a finger or a pen and

allows moving the mouse pointer. Use a stylus for best results. It functions only under integration of the necessary

software. Users get the corresponding touch screen driver for their operating system, installed on the

perator

nterface

omputer 10"/15"/17” NEMA4 panel system, IP10IA99 / IP15IA99 / IP17IA99 Panel system.

Do not use a hard or a pointed object (like screw drivers or pliers) to operate the touch screen, because

such an action will damage the surface of touch screen.

5.1.2 Front Panel Care and Cleaning (Chemical Resistance)

Mild detergent and water, or isopropyl alcohol is recommended for cleaning. Use of solvents with strong acidity or

alkalinity, which could react with the paint or printed color or plastic, should be avoided.

The overlay or the touch screen surface is subject to burning and scaring from direct heat sources such as lighters or

cigarettes. The front display is sealed against water and dust.

The front surface of the touch screen is a flexible plastic membrane, so care should be taken to avoid using sharp

objects such as blade of knife, pen or pencil tips. Sharp objects can permanently damage the functionality of the

touch screen.

The unit without a touch screen has a polycarbonate shield which might be scratched by an object sharp enough. For

detailed information, please refer to the following content.

Fig.5-14 : Chemical resistance for the area of textured paint

Содержание IP10IA99 series














































































Результаты поиска

Содержание IP10IA99 series

Отзывы:

Похожие инструкции для IP10IA99 series

Бренды по названию

Популярные бренды

AIS IP10IA99 series, Руководство пользователя

Результаты поиска

Содержание IP10IA99 series

Отзывы:

Похожие инструкции для IP10IA99 series

Бренды по названию

Популярные бренды