AIS DIUR series Скачать руководство пользователя страница 25

Страница: 25 / 135

Manual_Version 2.00(20070416)

2.Setup recording and menu movement

OK button: Record the selected setup mode until now.

Cancel button: Go out of the GUI menu

Back button: Go back to the previous menu from current GUI

3. System rebooting after setup.

Some of setup mode is not possible to operate during system operation after recording setup. These

items are only available after rebooting the system again. Our system is made to reboot automatically if

these items setup are recorded.

4.HDD data automatic deletion when time/date change

Our system operates time using embedded charge battery. Setup time newly In the beginning for the initial use.

Charge battery can be discharged if the system is on the move during operation or disuse for a long time with

unplugged. If discharged completely and use again by plugging power supply then initial time setting is the initial

time as factory default. . The data in HDD that is recorded with the date that is later than current time may be

deleted in order to sync time. Therefore, separate HDD and approve power supply and then do time setup and

install HDD again and use the system again.

5. The initial operation status after POWER ON

This system checks system status such as camera/HDD etc after power authorization. If there is no problem

after checking, recording is processed by factory default (Full frame recording by CIF mode for the all channel).

If recording mode is processed alright, red color wheel is appeared in the LIVE channel screen.

Содержание DIUR series








































































































































Результаты поиска

Содержание DIUR series

Отзывы:

AIS DIUR series, Руководство пользователя, Страница: 25 / 135

Результаты поиска

Содержание DIUR series

Отзывы: