G300Ni
7
4
GENERAL NOTICES
SAFETY: Make sure the power supply is switched off before you make any electrical
connections to the unit.
INSTALLATION: This equipment must be installed in accordance with the instructions
provided in this manual. Failure to do so could result in poor performance, personal injury
and/or damage to your vessel and/or connected equipment.
CONNECTION: To ensure the performance of the unit, as part of the installation it is
recommended that adequate grounding is connected to the unit. Further to this, it is
recommended that the power input supply is provided by a clean DC source with filtering
if required.
CABLES: The supplied cables should only be cut, shortened or lengthened by an
appropriate supplier.
In accordance with a policy of continual development and product improvement, hardware and
software may be upgraded from time to time, and future versions of equipment may therefore
not correspond exactly with this manual.
When necessary, upgrades to the product will be accompanied by updates or addenda to this
manual. Information contained in this manual is liable to change without notice.
Comar Systems Ltd. disclaims any liability for consequences arising from omissions or
inaccuracies in this manual and any other documentation provided with this product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
