Airzone Lutron, Руководство по установке

Страница: 7 / 11

7
ES
EN
FR
IT
PT
DE
LUTRON CONFIGURATION
To perform the integration with the Airzone system in the HomeWorks QS software, please follow the steps below:
1. Define the HVAC zones in the software in the menu design – loads and select HVAC zones.
Important
: On zoned ducted units the Fan Speed option enabled must be Auto. The “Auto” Operating Mode is only available
for Airzone systems in North America.
2. For Palladiom thermostats, add them to the rooms in the design – controls screen. After adding a thermostat, you
must assign the HVAC zone it will control in the Remote Zone setting.
3. Define the Airzone-Lutron interface in the design – equipment screen. Add a “3
rd
Party HVAC” device and name it
“Airzone System”. In the Manufacturer drop down, select “Generic (via integration)”. For Setpoint type , select “Dual”. In
the output table, click on Assign and add all the HVAC zones you created previously.
Note : The UID must be unique for each zone. Set the minimum and maximum Setpoint at 19ºC and 30ºC respectively. Set
the same differential value of Minimum Heat/Cool as Lutron System in case of Setpoint Dual.
4. On the navbar, click Tools and select Configure Integration .