17
ES
EN
FR
IT
PT
DE
DM2 domotic bus connector
The DM2 domotic bus allows the connection of control peripherals in order to manage all the systems connected to the
production control board. Can be connected:
-
Webserver Airzone Cloud Wi-Fi Dual 2.4-5G (AZX6WSC5GER)
Note:
Do not provide power supply in DM2 or IU ports.
For externally powered elements at 110/230 Vac, it is only needed to connect
“A” and “B” from the automation bus.
When connecting the Webserver Cloud (AZX6WSC5GER), remove the fixing post from the Webserver and put the connector in
DM2.
UI bus connector for Aerothermal gateway
The UI bus allows you to connect multiple gateways of for air-to-water equipment installed. These are the elements that can
be connected:
-
Airzone aerothermal gateway (AZX6GAW xxx).
In order to connect these gateways, disconnect the terminal of the UI bus and fit in the connector and the fixing post of the
gateway.
INT integration bus connector
The INT integration bus allows the connection of control peripherals in order to manage all the systems connected to the
production control board. Can be connected:
-
Airzone Supermaster controller embebed/Surface (AZX6CSMASTER E/S B/G)
-
Airzone-KNX integration gateway (AZX6KNXGTWAY)
It has a 5-pin terminal for the INT bus connection. This system can only be connected by
bus. Attach the wires with the terminal screws following the color code.
Note:
AZX6CCPGAWI integration bus connector cannot be used in installations with
Webserver Hub Airzone Cloud dual AZX6WSPHUB.
