Network - Static or DHCP
On the bottom of the camera there is one
RJ45 port available to connect the camera
to a network for RTSP streaming video data
out.
It is not necessary to configure the IP
address If the thermal camera is acting as a
stand- alone device that is only connected
to an external HDMI monitor or screen.
Press “Network” on the mobile phone
screen to configure the IP settings. The
default network IP setting is DHCP.
RTSP out - Switch video output to HDMI or RTSP
The button “RTSP out” makes it possible
to switch the video output from RTSP to
HDMI and vice versa. Press “RTSP out”
on the mobile telephone screen to switch
from “RTSP out” to “Local out”.
The option “RTSP out” directs the video
stream via the RTSP protocol through
the RJ45 port using the following URL:
rtsp://IP of physical port:8554/thermal
rtsp://IP of physical port:8553/visible
The option “Local out” is to switch the
video stream back to HDMI output.
Doc# - AIRYN-ATC-T-Series - v1.
3
6
