- 05 -
1-3
1-5
1-4
Power
bank
card
slot
Pull
rod
SE3T- Normal Mode
1.Turn off the power, pull out the lever, you can drag
(see Figure 1-3);
2. Pick up the "hands-on" and carry them (see figure 1-4).
1. Check if the power is sufficient and the brakes are in good
condition before riding.
2. Before first use, it is recommended to charge to full power.
3. It is not recommended to brake or turn sharply during the ride to
prevent side slipor or rollover.
4. Please observe the traffic rules and various site management
regulations during use.
5. Avoid using this product in bad weather such as rain, snow or ice.
6. When not in the riding mode, turn off the power.
Riding precautions
Power bank use
Power bank installation
Pull up the pull rod and insert the power bank
along the card slot.
Note: When installing the power bank, please
install it in the direction shown in Figure 1-5,
with the front facing outward.
Power bank disassembly
Turn off the power, pull up the pull rod, and pull the
power bank out of the card slot.
