CLEANING THE AIR FILTER
●
Your air conditioner is provided with a filter
cleaning indicator. When the indicator (D) lights up,
the filters should be removed for cleaning.
●
To remove the air filters, lift up the panel. Push
the air filters up slightly to unlock them. Pull out the
filters, clean the filter by washing in warm soapy
water and dry thorougly. Align and fit the filters in
place. Close the panel by pushing it in the center
to lock it in place.
●
Reset button (H) to turn off indicator (D).
Before performing any maintenance procedure,
make sure to disconnect the air conditioner from
the power.
DO NOT OPERATE THE UNIT WITHOUT
FILTERS!
16
PURIFYING FILTER REPLACEMENT
The air puritying filter should be removed from the
unit and replaced once a year, as shown in figures
1, 2 and 3.
1. Pulling out the filter
2. Replacing and securing the filter in its frame
3.
Sliding the filter back in its place
Note: The above procedure is used for replacing
the active carbon filter (when supplied).
CLEANING THE AIR CONDITIONER
●
Wipe the unit with a soft dry cloth or clean it
using a vacuum cleaner.
●
Do not use hot water or volatile materials which
could damage the surface of the air conditioner.
AT THE BEGINNING OF THE SEASON
●
Make sure there are no obstacles blocking the
flow of inlet or outlet air, in both indoor and outdoor
units.
●
Make sure the power is properly connected.
PROTECT THE ELECTRONIC SYSTEM
●
Indoor unit and remote control must be at least 1
meter away from a TV, radio or any other home
electronic appliance.
●
Protect the inner unit from direct sun or lighting.
CARE AND MAINTENANCE
