Contents
cooling
dry
heating
indoor
outdoor
indoor
outdoor
max.
min.
max.
min.
max.
min.
max.
min.
DB: 32
WB: 15.5
DB: 18
DB: 43
DB: -5
DB: 27
DB: 15
DB: 21
DB: -15
WB: 23
WB: 14
WB: 26
Operating Range of Air Conditioner
User Manual
Parts and Functions
1-5
Safety Considerations
6-7
17
Fault Checkup
18-25
Installation Procedures
26-31
Electrical Wiring
32
Functions of Wired Controller
33
Test Run & Fault Code
8-15
Operation instruction
16
Maintenance
Flow Logic II
series multiple air conditioner
systems adopt the consistent running mode,
by which, all indoor units can only be heating
or refrigerating operation at the same time.
To protect the compressor, the air
conditioning unit should be powered on for
over 12 hours before using it.
All indoor units of the same refrigerating
system should use the unified power switch
to ensure that all indoor units are in the
state of being powered on at the same time
during the operation of air conditioner.
Your air conditioner may be subject to any
change owing to the improvement of
Airwell
products.
Product Features
1.Function of central control
(optional from our company);
2.Automatic display of fault detection;
3.The air conditioner is provided with the
function fo compensation for power supply.
During operation,when the power supply
fails emergently and resumes again,the air
conditioner returns to the working condition
before power failure,if provided with
compensation function.
4.Now this indoor unit only has wired
controller function,the indoor unit that has
remote controller function need to set in
factory especially.
34
Disposal
whole model
brief model
The brief model is used in this manual for above
models.
AWSI-DCV072-N11
DCV072
AWSI-DCV096-N11
DCV096
