Airwell AW-C AW-FFM036T-N11, Руководство по обслуживанию

Страница: 96 / 133

Indoor unit installation
Note: Confirm the minimum drain tilt is 1/100 or more.
3.4.4
Duct and accessories installation
1. Install the filter(optional) according to air inlet size.
2. Install the canvas tie-in between the body and duct.
3. Air inlet and air outlet duct should be apart far enough to avoid air passage short-circuit.
4. Recommended duct connection.
5.Please refer to the following static pressure to install..
Model(KBtu/h) Static Pressure(Pa)
18~30 0~80
36 0~100
48~60 0~160
Change the fan motor static pressure
corresponding to external duct static pressure.
NOTE: 1.Do not put the connecting duct weight on the indoor unit.
2.When connecting duct, use inflammable canvas tie-in to prevent vibrating.
3.Insulation foam should be wrapped outside the duct to avoid condensate and internal duct underlayer shall
be added to reduce the noise for special requirement.
3.4.7 Adjust the air inlet direction(From rear side to under
-
side.)
①
Take off ventilation panel and flange,
②
Change the mounting positions of ventilation panel and air return flange .
94