Airvolution Esatto ESL60D2S, Руководство пользователя

Страница: 14 / 19

Cleaning and maintenance
CAUTION!
• Before cleaning the rangehood or carrying out
maintenance, make sure the operation and
light switches are set to the “ 0 ” position and
the rangehood is disconnected from the power
supply.
• It is important to clean the filters regularly as oil
and food residues can become a fire hazard.
• Never use a steam cleaner to clean any part of
the rangehood.
Cleaning the rangehood exterior
Wipe the exterior surface of the rangehood
regularly using a soft cloth moistened with a
household solvent such as methylated spirits, or
with a sponge dampened with water and a little
non-abrasive liquid detergent.
Cleaning the grease filters
The aluminium mesh filters must be cleaned
regularly in order to prevent a fire hazard. Regular
cleaning also ensures better efficiency, as
grease and grime can impede the airflow. We
recommend cleaning them at least every two
months.
• Push in the plastic opening latch and take
the filters out of their frames (Fig. ).
Fig.
• Wash the filters thoroughly in warm, soapy
water, leaving them to soak for best results.
Rinse with warm water and leave to dry.
NOTE: The aluminum panels may slightly
change colour after several washes.
This is not a fault and no cause
for concern. It does not affect
performance and does not warrant
replacement of these parts.
Replacing a light bulb
If the light bulb needs replacing, proceed as
follows:
• Slide out the front panel for easier access and
remove the two aluminium mesh flters (Fig. 10).
• Carefully turn the bulb in anticlockwise
direction and remove (Fig. 11).
• Replace the bulb with one of the same type
and wattage (E14, 28W), as illustrated below
(Fig. 12).
O T H E R U S E F U L I N F O R M AT I O N
Fig. 10
Fig. 11
Fig. 12