AirVerter Gravity MicroFlex MFG-3100, Руководство пользователя, Страница: 11 / 14

TROUBLESHOOTING
Trouble Probable Cause Remedy
Paint Will Not
Flow
1. Blockage in fluid nozzle
2. Loss of air pressure in cup
3. Loose fluid nozzle
4. Paint hose loose, damaged
or clogged
5. Coating is too thick
6. Loose Needle Packing
1. Clean or replace; strain paint
2. Search for air leaks and
check cup gasket
3. Tighten
4. Tighten, replace or clean;
strain paint
5. Thin the coating
6. Replace packing
Inconsistent
Spray Pattern
(Spits And
Sputters)
1. Running out of paint
2. Loose fluid tube
3. Loss of fluid pressure
4. Loose needle packing
5. Damaged air pressure tube
1. Fill cup or pot, but never to
the top (3/4 max.)
2. Tighten
3. Search for air leaks or
blockages
4. Replace packing
5. Air pressure tube requires
replacing or close inspection
Leakage at
Front of Gun
1. Damaged fluid needle
2. Dirty fluid nozzle
3. Impurities in paint
4. Loose fluid tube
5. Fluid adjustment screwed all
the way out
6. Needle not firmly seated in
the spray head
7. Packing too tight
1. Replace
2. Clean
3. Strain paint
4. Tighten
5. Rotate Fluid Control Knob
(DT-3012) on rear of gun
clockwise
6. Check for spray head
obstruction
7. Replace Packing
Distorted
Spray Pattern
1. Dirty or damaged spray head
2. Dirty or damaged fluid tube
or needle
3. Fluid tube partially clogged
1. Clean or replace
2. Clean or replace
3. Clean