15
Two ATFS-2 Pedal Board Kit
The BT-105 or DIGIT may be
purchased with 2 ATFS-2 silent
footswitches. This option is ideal
for many applications in which
two switches are needed. For
example, it could be used to go
forward or backwards in a page-
turning application.
The ATFS-2 footswitch uses a
combination of rare earth metals to
close the switch, making it silent
and highly reliable for a very long
time. There are no mechanical parts to break.
Mode Management
Please see the section in the BT-105 for mode management.
The right footswitch is plugged into port 3 and the left switch is
plugged into port 1.
Important: Be careful not to hold down one of the switches
while turning on the unit, as it may inadvertently change the
mode.
If you are using the DIGIT with the Pedal Board kit, see the
DIGIT section for mode management.
