Getting SS-300-AT-C-50 Online
Power up
(marked as LAN1)
Step 1:
If using PoE, plug one end of the Ethernet cable into the
PoE switch or injector and plug the other end into the
LAN + PoE port
on the
SS-300-AT-C-50.
Make sure the PoE source you are using is turned ON.
OR
If not using PoE, insert the power adapter plug into an
AC power outlet and the other end into the power
input port on the SS-300-AT-C-50.
Step 2:
If you are using PoE, then SS-300-AT-C-50 should
already be connected to your network. If you are
not using PoE, then plug one end of the Ethernet
cable into an Ethernet jack on your network and the
other end into the LAN port
on
the SS-300-AT-C-50.
Connect to the network
(marked as LAN1)
With PoE
Without PoE
Step 3:
Wait for a few minutes till the three LEDs for Power,
LAN and Wi-Fi turn GREEN, which indicates that
the SS-300-AT-C-50 is online and operational.
Check the LED status
Power
LAN
Wi-Fi
Warning:
If not using PoE, make sure you use only the AC power adapter that came in the package
to power up the SS-300-AT-C-50.
Warning:
Make sure you plug the Ethernet cable only into the LAN1 port and not into the LAN2 port or
into the Console port
LAN 1
(Et PoE)
LAN 2
(Ethernet Only)
Console
