5
HOW IT WORKS
This large humidifier is designed to increase the room humidity up to a
specified level. Two major systems are employed:
1.Air flow system, which uses an asynchronous motor and axial flow fan to
drive the air through the evaporative pads and blow a certain amount of
humid air into the room.
2. Water wheel, which holds the evaporative pads onto the drum, which is
driven by a synchronous motor and gear mechanism. The pads deliver
water from the water tank through the drum rotation and the fan removes
certain moisture from the sponge by the principle of evaporation.
IMPORTANT : Before switching on the unit, ensure that the water
wheel snaps into the bearings at both ends correctly, to ensure the
correct movement of the water wheel
FILLING THE WATER
1.
Lift up the water inlet cover. Fill the water into the tank through the water inlet
tube (Figure.1). Once the water reaches the max level, there will be a 10sec
audible alarm and the green light will illuminate. When you fill the water with the
unit unplugged from the electric socket, please check the "MAX" water level
indicator through the overflow connector cap located at the tank. You can also
fill water directly into the tank by removing the tank as follows:
1) Unlock/open the top cover and remove the water wheel
2) Unlock the tank, and slide it out (Figure.2).
Figure.1 Figure.2
IMPORTANT:
in order to avoid the risk of electric shock, unplug the appliance
during filling and cleaning, and take care not to spill water on the
control panel and wiring inside the unit.
